Product ID:R64-0002 SERIES II LASER TYPE TONER
MSDS Date:03/01/1989
FSC:6850
NIIN:01-323-3172
MSDS Number: CBQXB

WESTERN DUPLICATING SUPPLIES

5602-2ND AVE S
SEATTLE, WA 98108
US

Emergency Phone: 206-767-5323

Info Phone: 206-767-5323

Cage: 0JPG6

WESTERN DUPLICATING SUPPLIES

80351 SEATTLE, WA 98108 US

Telephone: 206-767-5323

Cage: 0JPG6

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

Fraction By Weight: <5%

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3

NON-HAZARDOUS INGREDIENTS

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE AND CHRONIC:NONE LISTED BY
MANUFACTURER.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE TO FRESH AIR.
SUPPORT BREATHING (GIVE O*2/ARTF RESP) . EYES:FLUSH W/WATER FOR @
LEAST 15 MINS. SKIN:WASH W/SOAP & WATER.

Extinguishing Media:FOAM, DRY CHEMICAL, CO*2.
Fire Fighting Procedures:NONE. USE NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL IS COMBUSTIBLE.

Spill Release Procedures:NO TONER PRODUCT IS CONSTRUCTED FROM PLASTIC &
METALS. THE WASTE TONER COULD BE CONSIDERED AS PLASTIC WASTE.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP OUT OF REACH OF CHILDREN. KEEP
AWAY FROM CONTACT WITH OXIDIZING MATERIALS.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:NONE REQUIRED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:GOOD GENERAL VENTILATION SHOULD BE SUFFICIENT.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Melt/Freeze Pt:M.P/F.P Text:0
Spec Gravity:1.5-1.7(H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FINE BLACK POWDER, MILD RESINOUS ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:COMBUST WILL PRODUCE CARBON DIOXIDE
AND POSSIBLE TOXIC CHEMICALS SUCH AS CARBON MONOXIDE.

Waste Disposal Methods:DISPOSAL SHOULD BE SUBJECT TO FEDERAL, STATE, OR
LOCAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.